RealMe 6 PRO USB Driver for Windows4 min read

Reading Time: 3 minutes

When you want to connect your RealMe 6 PRO to your Windows PC, you will need to download a driver for the device.

In this article, you will learn about the process of installing the driver, as well as the various compatibility requirements for Windows 8.1, Windows 8, and Windows 7.

Download RealMe 6 PRO USB Driver (Here)

Installing the driver:

In case you have a Realme smartphone and want to connect it to your computer for various purposes, you need to install the RealMe 6 Pro USB driver.

This driver helps you to transfer files from your phone to your computer and also supports flashing stock ROMs on your device. You can download the driver on the below link.

The RealMe 6 Pro USB Driver supports multiple operating systems. It is compatible with Windows 8 (32-bit), Windows 7 (32-bit and 64-bit), Windows 10 (32-bit and 64-bit), and Windows Vista (32-bit). To install the RealMe 6 PRO USB driver, follow the steps below.

First, you need to extract the RealMe 6 Pro USB driver from the downloaded file. The extracted folder contains all the required files. Next, you need to use Device Manager to install the driver.

Now, you need to restart the PC to activate the driver. If the computer fails to recognize the driver, you need to update the device’s entry in the Device Manager.

Compatibility with Windows 8.1, Windows 8, and Windows 7:

If you have bought a Realme 6 Pro, you should know that you need to install a USB driver for the device. This will allow you to connect the phone to your PC and perform various activities, including firmware flashing.

To install a USB driver for Realme, first, download the driver. This will be located in c:userssaeedashif and should be recognized by the PC. After that, restart the PC and follow the instructions.

Before you install a Realme USB driver, you will need to make sure that the computer is compatible with the version of Windows you are running.

Usually, modern computers running Windows 10 will automatically fetch the Realme USB drivers. However, older versions of the operating system may not be able to do this.

Some of the best ways to check whether your PC is compatible with Windows 10 are by checking the compatibility section in the Windows Store, or by using the Hardware Update Wizard.

The Hardware Update Wizard will search your computer for driver software. Once it finds it, it will ask you to install it.

Getting a problem during connection to Windows PC:

If you are a smartphone user, you know that the Realme 6 Pro USB Driver is the bridge that connects you to your PC.

It makes it easier to transfer data and other files between the two devices. However, there are some things you need to know before you start using it.

First, you need to make sure you have the right USB cable. A faulty USB port can cause you problems. You should also verify if your Android device is correctly plugged into the cradle.

While you are at it, you should update your video card and monitor drivers. You can do this automatically, or you can try to update them manually.

Also, you should check out the Wi-Fi Tethering capabilities of your device. These are great ways to keep your smartphone connected to your PC, but they may cause you some trouble. To ensure your device is capable of tethering, you should set your APN settings correctly.

Successfully booting into recovery mode:

The RealMe 6 PRO USB Driver helps connect your device to a PC and establishes a proper connection. It allows you to download and install software, transfer data, and more.

In addition, it can resolve connection issues. You can also sideload OTA updates and flash custom ROMs, which will give you extra features.

First, you must ensure that you have an unlocked bootloader on your Realme. This is important because you will need to enter fastboot mode to unlock your phone.

Also, you need to have the latest USB drivers installed on your PC. If you don’t, the USB drivers won’t work.

After installing the Realme 6 Pro USB Driver, you should be ready to enter recovery mode. You can do this by using the physical buttons on your device or ADB commands.

Once you have entered Recovery Mode, you can start flashing custom ROMs. You can also install kernels and mods.