Jiykr Programming Cable Driver for Windows2 min read
If you are using the Wouxun PCO-001 or PCO-003 programming cable, you may have found yourself having trouble installing it on a Windows 10 computer. This is usually caused by a driver installation that does not work properly.
This is due to the fact that many of these cables are based on. A Prolific PL-2303 USB chip is being counterfeited by Chinese manufacturers. To prevent this from happening, be sure to avoid cables that use these chips.
Driver Installation of the Jiykr Programming Cable Driver:
We’ve recently received calls from customers who are having trouble installing some of their Wouxun programming cables in Windows 10. This is a common issue and is typically caused by the driver on the mini-cd that comes with the cable being out of date.
The good news is that there’s a simple solution. The first step is to ignore the mini-cd and let Windows do the heavy lifting.
To do this, open the Device Manager in Windows and look for a splat mark (!) next to the listing for your cable. It should have disappeared once the driver has been installed.
Another possible cause of the problem is that Windows is having a hard time detecting the cable because it has Power Management turned on.
To fix this, go to the Device Manager and remove the check that says “Allow this device to turn off to save power”. This should allow Windows to detect the cable again!
The device manager is not only a convenient way to keep track of. What USB devices are installed on your PC, but it also lets you see which cables and. Other gizmos are actually being used.
Some cable models will load the correct driver automatically, while others need to be manually scanned for the best fit.
You can also verify the quality of the connection using an oscilloscope or a multimeter. Depending on the manufacturer, the cable may even boast an impressive battery life!
To find the right driver for your Wouxun programming cable, you should first check the manufacturer’s website to see if they have a download site.
If they do, you can download the latest drivers for free. Once you’ve done this, you should be able to get the cable up and running in no time.